Search
Products
    Menu Close

    10 in. 95 lbs. Gas Charged Lift Support, Signature SE100P-95 SE100P95

    Manufacturer: Signature Gas Springs
    10 inch 95 lbs. gas charged lift support by Signature gas Springs. Commercial grade construction, ensuring the best quality and performance.
    SKU: SE100P-95
    Manufacturer part number: SE100P-95
    $24.99
    $18.99
    i h

    Signature Series Gas Springs

    Signature Series gas springs are manufactured to ISO 9001/ISO 14001 and QS 9000 Standards.  This assures that your lift support is made to the highest quality and performance standards.  

    The tube is black powder coated and the rod has a black nitride surface treatment to provide and excellent corrosion resistance.

    This gas charged lift support provides controlled motion and support to lift and lower for a variety of applications such as:
    Lids, hatches, doors, furniture, boats, recreational vehicles, office equipment, farm equipment and much more.

    This is for a single (1) unit.  These supports are typically used in pairs, we highly recommend to also replace them in pairs to avoid potential problems and for best performance.

    Lift supports are also referred to as gas props, gas springs, gas struts or gas charged lift supports.

    If a matching part number is not available, identify the correct replacement gas spring by measuring extended and compressed length (eyelet to eyelet) and identify the pressure, typically in Newtons or Lbs. 

    For further information please refer to our blog article on how to identify and measure gas springs.

    If you need any assitance please feel free to contact us. Knowledgeable customer support representatives are standing by.

    Signature Series Gas Springs

    Signature Series gas springs are manufactured to ISO 9001/ISO 14001 and QS 9000 Standards.  This assures that your lift support is made to the highest quality and performance standards.  

    The tube is black powder coated and the rod has a black nitride surface treatment to provide and excellent corrosion resistance.

    This gas charged lift support provides controlled motion and support to lift and lower for a variety of applications such as:
    Lids, hatches, doors, furniture, boats, recreational vehicles, office equipment, farm equipment and much more.

    This is for a single (1) unit.  These supports are typically used in pairs, we highly recommend to also replace them in pairs to avoid potential problems and for best performance.

    Lift supports are also referred to as gas props, gas springs, gas struts or gas charged lift supports.

    If a matching part number is not available, identify the correct replacement gas spring by measuring extended and compressed length (eyelet to eyelet) and identify the pressure, typically in Newtons or Lbs. 

    For further information please refer to our blog article on how to identify and measure gas springs.

    If you need any assitance please feel free to contact us. Knowledgeable customer support representatives are standing by.

    Products specifications
    End Fittings 10 mm Ball Socket, Plastic
    Extended Size 10.0 inches
    Compressed Size 7.0 inches
    Pressure 95 Lbs.