Caliber makes the glide and traction systems that load snowmobiles without tearing up trailer decks or ski carbides. SiraWeb carries Caliber Multi-Glides and LowPro glides, Grip Glides, Flex Glides, Trax Grabber and TraxMat traction, Edge Glides, marine bunk slides, the Poly-Shield salt shield and the E-Z Load trailer lift, with set sizes and coverage spelled out for each trailer.
Caliber Grip Glides 13350: the straight front tilt set of 22 pieces. Grip Glides combine a tire-grip surface for ATVs with glide grooves for snowmobile carbides. Hardware included.
Caliber Grip Glides 13351: the enclosed trailer door set of 32 pieces. Grip Glides combine a tire-grip surface for ATVs with glide grooves for snowmobile carbides. Hardware included.
Caliber Grip Glides 13352: the ramp set of 16 pieces. Grip Glides combine a tire-grip surface for ATVs with glide grooves for snowmobile carbides. Hardware included.
Caliber 13362 EdgeGlideTilt: a 4-piece set of edge glides without hinges that bridges the gap at a tilt trailer's edge so snowmobile skis cross without catching. Stainless hardware included.
Caliber Poly-Shield Series III (13401): a 25.5 inch high salt and splash shield for V-front and flat-front snowmobile trailers, fitting trailers 95 to 102 inches wide. Quick-Detach kit included.
Caliber Trailer Lift 13511: a high-pressure gas spring lift assist for tilt trailers, 20 inches extended and 12 inches compressed, with steel ends. Spring, two ball-stud brackets and screws included.
Caliber Marine Slides in black: low-friction bunk slides, 3 by 15 inches, 10 per pack. They mount on horizontal or vertical bunks so the boat slides on and off instead of dragging on carpet.
Caliber Marine Slides in white: low-friction bunk slides, 3 by 15 inches, 10 per pack. They mount on horizontal or vertical bunks so the boat slides on and off instead of dragging on carpet.
Caliber 23060 Trax Grabber: a 2-piece traction kit, 16 inches wide, that grips the snowmobile track for loading traction. Fits 2.52, 2.86 and 3.0 inch track pitches. Hardware included.
Caliber Slydz-On bunk lubricant: a 16 ounce spray applied to carpeted bunks to cut friction, so the boat launches and loads with less effort. 1 pint spray bottle.
A 6 pack of 15 inch Caliber Grips that screw flat to a snowmobile trailer deck to give the track traction and help protect the decking from stud damage. Stainless steel attaching hardware and mounting instructions are included.
A 6 piece kit of Caliber Ramp Grips that wrap around 1 in ramp crossbars to protect the ramp from studded tracks and improve traction and braking control. Stainless steel Torx fasteners and driver are included.
Caliber Multi-Glides 13305: a single set of 4 glide sections, 5 feet each (20 ft total), 5-7/8 in. wide, with stainless fasteners included. Outfits a single-place 10 ft trailer.
Caliber Multi-Glides 13306: a single set of 4 glide sections, 5 feet each (20 ft total), 8 in. wide, with stainless fasteners included. Outfits a single-place 10 ft trailer.
Caliber Multi-Glides 13310: a double set of 8 glide sections, 5 feet each (40 ft total), 5-7/8 in. wide, with stainless fasteners included. Outfits a 10 ft two-place trailer.
Caliber Multi-Glides 13311: a double set of 8 glide sections, 5 feet each (40 ft total), 8 in. wide, with stainless fasteners included. Outfits a 10 ft two-place trailer.
Caliber Multi-Glides extension set 13313: four 30 inch sections, 5-7/8 in. wide, that extend a Multi-Glides set to complete a 12 foot trailer. A 33-pack of stainless screws is included.
Caliber Multi-Glides extension set 13314: four 30 inch sections, 8 in. wide, that extend a Multi-Glides set to complete a 12 foot trailer. A 33-pack of stainless screws is included.
Caliber Flex-Glides Low Profile (13342): a set of 8 interlocking glides, 44 inches connected, for the front of V-front trailers. Stainless fasteners included.
Caliber Flex-Glides High Profile (13343): a set of 8 interlocking glides, 44 inches connected, for the front of V-front trailers. Stainless fasteners included.
The Caliber 13370 LowPro Glides Narrow extension set adds 10 ft of 6 in wide glide coverage in four 30 in sections. Stainless steel Torx mounting hardware and driver are included.
The Caliber 13373 LowPro Glides Standard extension set adds 10 ft of 9 in wide glide coverage in four 30 in sections. Stainless steel attaching hardware and mounting instructions are included.
The Caliber 13374 LowPro Glides Standard Single Set provides 20 ft of 9 in wide glide coverage in eight 30 in sections. Hardware is included with the set.
The Caliber 13375 LowPro Glides Standard Double Set provides 40 ft of 9 in wide glide coverage in sixteen 30 in sections. All stainless steel screws needed to install the complete kit are included.
The Caliber 13377 LowPro Glides Wide Single Set provides 20 ft of 11.5 in wide glide coverage in eight 30 in sections. Hardware is included with the set.
The Caliber 13378 LowPro Glides Wide Double Set provides 40 ft of 11.5 in wide glide coverage in sixteen 30 in sections. The system is designed for snowmobiles and ATVs, with hardware included.
The Caliber 13380 LowPro GripGlides Narrow Single Set provides 20 ft of 6 in wide grip and glide coverage in eight 30 in sections. Hardware is included with the set.
The Caliber 13381 LowPro GripGlides Narrow Double Set provides 40 ft of 6 in wide grip and glide coverage in sixteen 30 in sections. Hardware is included with the set.