Trailer brake parts for electric and hydraulic systems: complete brake assemblies in 7, 10 and 12 inch sizes, brake drums, armature magnets, brake shoes and the mounting hardware that renews a trailer's braking.
A 40 amp circuit breaker for 6, 12, and 24 volt DC systems that need over-current protection. Its non-corrosive molded cover eliminates grounding when operating against a fault line, and a mounting bracket is included.
A 50 amp circuit breaker from CEQUENT TOWING for over-current protection in 6, 12, and 24 volt DC applications. Its non-corrosive molded cover eliminates grounding when operating against a fault line.
Hardware kit from Cequent Towing for the Dexter 7 in. x 1-1/4 in. brake assembly. It combines the return spring, hold down clips, and adjusting screw components in one kit.
Complete trailer hub bearing kit for a 1-1/16" spindle and Includes 2 bearings, 2 bearing cups, 1 grease seal and 1 cotter pin. Included: 2 bearings part LM44649, 2 bearing cups part LM44610, 1 grease seal part GS203025, 1 cotter pin part CP2. Fits 1-1/16" Spindle.
Left hand disc brake caliper assembly for brake rotor RL91001, with a 5 stud on 4-1/2 in pattern and an E-coated finish. Sold as a single caliper assembly for the left side.
Right hand disc brake caliper assembly for brake rotor RL91001, with a 5 stud on 4-1/2 in pattern and an E-coated finish. Sold as a single caliper assembly for the right side.
Time-based Reliance brake control from Hopkins, MPN 47284, in the plug-in connector version for up to 4 trailer brakes, with a digital readout for power settings.
Hydraulic drum brake assembly in 10 in x 2-1/4 in size for the left side, with 1850 lb capacity. Flange bolts and lock nuts are not included and are sold separately.
Hydraulic drum brake assembly in 10 in x 2-1/4 in size for the right side, with 1850 lb capacity. Flange bolts and lock nuts are not included and are sold separately.
Hydraulic drum brake assembly in 12 in x 2 in size for the right side, with 2600 lb capacity. Flange bolts and lock nuts are not included and are sold separately.
Pro Series 12 in. x 2 in. electric trailer brake assembly for the right side. Supplied fully assembled, and replaces Dexter electric trailer brake assemblies.
The breakaway systems will automatically apply consistent braking power to your trailer brakes if a breakaway occurs between your vehicle and trailer. For use on 1, 2, 3, or 4 axle trailers equipped with electric brakes Meet or exceeds DOT specifications regarding trailer breakaway and holding requirements Weather/corrosions resistant, heavy duty polymer case to protect the battery and charger Includes: Lockable polymer battery case with A frame or post mounting bracket (part #852051) Rechargeable sealed 12V 4 AMP-hr lead acid battery and terminals (part #852023) Breakaway switch (part #852010) DC to DC heavy duty quick/maintenance (Multi stage) battery charger (part #852024)
This Tekonsha brake control wiring harness uses a 2-plug design to connect a compatible brake control to the vehicle's wiring port. Look for the Plug & Play logo on the control to confirm it is a compatible type.
A brake assembly replaces every wear part on one wheel in a single unit, which is usually faster and cheaper than chasing shoes, magnets and springs separately. Assemblies are handed, left hand and right hand, so order the sides the axle needs, and match the assembly size and mounting pattern to the drum it runs in. Drums, magnets and shoes are here individually for partial repairs.