Search
Products
    Menu Close

    Brake Parts

    Trailer brake parts for electric and hydraulic systems: complete brake assemblies in 7, 10 and 12 inch sizes, brake drums, armature magnets, brake shoes and the mounting hardware that renews a trailer's braking.

    View as Grid List
    Sort by
    Display per page
    C.E. Smith dust cap, part 16200, for 1.98 inch hub inner diameter

    C.E. Smith Dust Caps (Pair) 16200

    C.E. Smith dust caps that protect the axle nut. Fit a hub with a 1.98" inner diameter. Sold in pairs.
    $1.99 $1.49
    Cequent 40-amp circuit breaker with metal mounting bracket and two stud terminals

    CEQUENT TOWING 40 Amp Circuit Breaker

    A 40 amp circuit breaker for 6, 12, and 24 volt DC systems that need over-current protection. Its non-corrosive molded cover eliminates grounding when operating against a fault line, and a mounting bracket is included.
    $18.49 $12.15
    Cequent 50-amp circuit breaker with metal mounting bracket and two stud terminals

    CEQUENT TOWING 50 Amp Circuit Breaker 7022A-S

    A 50 amp circuit breaker from CEQUENT TOWING for over-current protection in 6, 12, and 24 volt DC applications. Its non-corrosive molded cover eliminates grounding when operating against a fault line.
    $16.49 $10.94
    Zinc-plated C-shaped left-hand brake actuating lever with mounting holes and raised tab

    Cequent Towing 5206 Actuating Lever, Left-Hand (L.H.), for Hayes Brakes

    Left-hand (L.H.) actuating lever for Hayes brakes from Cequent Towing.
    $22.99 $15.32
    Dexter left-hand brake actuating lever, zinc-plated curved lever with mounting holes and roller pin

    Cequent Towing 5232 Actuating Lever, Left-Hand (L.H.), for Dexter Brakes

    The Cequent Towing 5232 is a left-hand (L.H.) actuating lever designed for Dexter brakes.
    $22.99 $15.32
    Brake return spring set — four coil springs with hooked ends arranged diagonally

    Cequent Towing 5305 Return Spring Set (Axle Set)

    Cequent Towing return spring set supplied as an axle set. Designed for select Dexter and Hayes brakes.
    $15.99 $10.76
    Brake return springs for electric trailer brakes — pair of long coil springs with hooked extension rods

    Cequent Towing 5306 Return Spring Set for Electric Trailer Brakes (Axle Set)

    Cequent Towing return spring set for electric trailer brakes. Supplied as an axle set and sold each.
    $8.30 $7.47
    Trailer hub grease seal, single lip — metal ring with dark inner lip, angled view

    Cequent Towing 5607 Grease Seal, 1.750 in. ID x 2.330 in. OD, Single Lip

    The Cequent Towing 5607 is a single-lip grease seal. It is sold individually.
    $9.99 $7.49
    Electric brake magnet kit — oval magnet with two wires, coil spring and clip

    Cequent Towing 6106 Magnet Kit for AL-KO 10 in. x 2-1/4 in. Trailer Brakes

    Magnet kit for AL-KO 10 in. x 2-1/4 in. trailer brakes, with light green wires. Fits and replaces AL-KO Kober 10 x 2-1/4 in. units.
    $63.79 $56.99
    Electric brake magnet kit — oval magnet with wires, coil spring and clip

    Cequent Towing 6109 Magnet Kit for AL-KO 12 in. x 2 in. Trailer Brakes

    Magnet kit for AL-KO 12 in. x 2 in. trailer brakes with white wires. Fits and replaces AL-KO Kober 12 x 2 brakes in the 6K and 7K classes.
    $66.16 $58.99
    AL-KO left-hand brake actuating lever, zinc-plated curved lever with mounting holes and raised tab

    Cequent Towing 6206 Actuating Lever, Left-Hand (L.H.), for AL-KO 10 in. Brakes

    Left-hand (L.H.) actuating lever from Cequent Towing for AL-KO 10 in. brakes.
    $20.41 $18.37
    Battery post adapters, pair — brass threaded studs with hex nuts and yellow ring terminals

    CEQUENT TOWING Battery Post Adapter, Pair

    Side post adapters for General Motors vehicles from CEQUENT TOWING. Sold as a pair.
    $19.43 $18.49
    Brake hardware kit for Dexter 7 x 1-1/4 brake assembly — springs, hold-down clips and adjusting screw parts laid out flat

    Cequent Towing Hardware Kit for Dexter 7 in. x 1-1/4 in. Brake Assembly 5320

    Hardware kit from Cequent Towing for the Dexter 7 in. x 1-1/4 in. brake assembly. It combines the return spring, hold down clips, and adjusting screw components in one kit.
    $40.49 $34.19
    Trailer bearing kit — two tapered roller bearings with races, grease seal and cotter pin

    Complete Trailer Bearing Kit for 1-1/16" Spindle, Cequent WB106 0700

    Complete trailer hub bearing kit for a 1-1/16" spindle and Includes 2 bearings, 2 bearing cups, 1 grease seal and 1 cotter pin. Included: 2 bearings part LM44649, 2 bearing cups part LM44610, 1 grease seal part GS203025, 1 cotter pin part CP2. Fits 1-1/16" Spindle.
    $19.99 $11.49
    Dexter Axle 81099 flexible disc brake line kit

    Dexter Axle 81099 Flexible Disc Brake Line Kit, One Axle

    The Dexter Axle 81099 is a flexible disc brake line kit that provides the brake line hookup for one trailer axle.
    $65.15 $35.99
    Reliable CLA1000 disc brake caliper assembly, left hand

    Disc Brake Caliper Assembly, Left Hand, Reliable CLA1000

    Left hand disc brake caliper assembly for brake rotor RL91001, with a 5 stud on 4-1/2 in pattern and an E-coated finish. Sold as a single caliper assembly for the left side.
    $129.45 $62.49
    Reliable CRA1000 disc brake caliper assembly, right hand, black E-coated finish

    Disc Brake Caliper Assembly, Right Hand, Reliable CRA1000

    Right hand disc brake caliper assembly for brake rotor RL91001, with a 5 stud on 4-1/2 in pattern and an E-coated finish. Sold as a single caliper assembly for the right side.
    $129.45 $62.49
    Reliable FB-375 flange bolt, 3/8-16, silver zinc hex head

    Flange Bolt, 3/8-16, Reliable FB-375

    This flange bolt has a 3/8-16 thread and a hex head flange design with a silver zinc finish. It is sold each, so order the quantity your job requires.
    $0.99 $0.66
    Reliable FLN-437 flange lock nut, 7/16-20, zinc plated

    Flange Lock Nut, 7/16-20, Zinc Plated, Reliable FLN-437

    Zinc plated flange lock nut with a 7/16-20 thread, sold each. Four are needed per brake, so order four for one brake.
    $1.49 $0.92
    Hopkins 20107 Weldable Mounting Plate: ENGAGER Side-Mount Break-Away Kits 20099, 20100 and 20101

    Hopkins 20107 Weldable Mounting Plate: ENGAGER Side-Mount Break-Away Kits 20099, 20100 and 20101

    Accessory plate, MPN 20107, for mounting ENGAGER Side-Mount break-away kits 20099, 20100 and 20101 to a trailer.
    $19.49 $12.82
    Hopkins 20407 Weldable Mounting Plate: ENGAGER Flip-Top Break-Away Kits 20400 and 20401

    Hopkins 20407 Weldable Mounting Plate: ENGAGER Flip-Top Break-Away Kits 20400 and 20401

    Accessory plate, MPN 20407, for mounting ENGAGER Flip-Top break-away kits 20400 and 20401 to a trailer.
    $15.99 $10.75
    Hopkins 47284 Reliance Digital Trailer Brake Control: Time-Based, 4-Brake Capacity, Plug-In Connector

    Hopkins 47284 Reliance Digital Trailer Brake Control: Time-Based, 4-Brake Capacity, Plug-In Connector

    Time-based Reliance brake control from Hopkins, MPN 47284, in the plug-in connector version for up to 4 trailer brakes, with a digital readout for power settings.
    $102.95 $69.99
    Reliable HBLH-1000 hydraulic brake, 10 in x 2-1/4 in, left side

    Hydraulic Brake, 10 in x 2-1/4 in, Left Side, Reliable HBLH-1000

    Hydraulic drum brake assembly in 10 in x 2-1/4 in size for the left side, with 1850 lb capacity. Flange bolts and lock nuts are not included and are sold separately.
    $85.10 $49.99
    Reliable HBRH-1000 hydraulic brake, 10 in x 2-1/4 in, right side

    Hydraulic Brake, 10 in x 2-1/4 in, Right Side, Reliable HBRH-1000

    Hydraulic drum brake assembly in 10 in x 2-1/4 in size for the right side, with 1850 lb capacity. Flange bolts and lock nuts are not included and are sold separately.
    $85.10 $52.49
    Reliable HBRH-1200 hydraulic brake, 12 in x 2 in, right side

    Hydraulic Brake, 12 in x 2 in, Right Side, Reliable HBRH-1200

    Hydraulic drum brake assembly in 12 in x 2 in size for the right side, with 2600 lb capacity. Flange bolts and lock nuts are not included and are sold separately.
    $102.80 $49.99
    Pro Series electric trailer brake assembly — backing plate with brake shoes, return springs, adjuster and magnet

    Pro Series 12 in. x 2 in. Electric Trailer Brake Assembly, Right Side

    Pro Series 12 in. x 2 in. electric trailer brake assembly for the right side. Supplied fully assembled, and replaces Dexter electric trailer brake assemblies.
    $140.99 $93.99
    Shurset Iii Break-Away Kit

    Shurset Iii Break-Away Kit

    The breakaway systems will automatically apply consistent braking power to your trailer brakes if a breakaway occurs between your vehicle and trailer. For use on 1, 2, 3, or 4 axle trailers equipped with electric brakes Meet or exceeds DOT specifications regarding trailer breakaway and holding requirements Weather/corrosions resistant, heavy duty polymer case to protect the battery and charger Includes: Lockable polymer battery case with A frame or post mounting bracket (part #852051) Rechargeable sealed 12V 4 AMP-hr lead acid battery and terminals (part #852023) Breakaway switch (part #852010) DC to DC heavy duty quick/maintenance (Multi stage) battery charger (part #852024)
    $73.49 $70.99
    Tekonsha brake control wiring harness kit — plugs, coiled wire looms, terminals, fuse holder and wire ties laid out

    Tekonsha 30234-P Brake Control Wiring Harness, 2-Plug Style

    This Tekonsha brake control wiring harness uses a 2-plug design to connect a compatible brake control to the vehicle's wiring port. Look for the Plug & Play logo on the control to confirm it is a compatible type.
    $127.24 $100.20
    Tekonsha brake shoe and lining kit — two curved brake shoes with friction linings arranged in a circle

    Tekonsha 5002 Shoe and Lining Kit (Wheel Set) for Dexter 7 in. x 1-1/4 in. Brakes

    Tekonsha 5002 is a shoe and lining kit, supplied as a wheel set, for Dexter 7 in. x 1-1/4 in. brakes.
    $63.44 $29.49
    Tekonsha brake magnet kit — round magnet with white wires, spring and small clip

    Tekonsha 5113 Magnet Kit, White Wires, Round Magnet

    Tekonsha 5113 magnet kit with white wires and a round magnet. It fits or replaces select Dexter 12 in. x 1-1/2 in. and 7 in. x 1-1/4 in. brakes.
    $52.45 $45.99

    A brake assembly replaces every wear part on one wheel in a single unit, which is usually faster and cheaper than chasing shoes, magnets and springs separately. Assemblies are handed, left hand and right hand, so order the sides the axle needs, and match the assembly size and mounting pattern to the drum it runs in. Drums, magnets and shoes are here individually for partial repairs.

    Shop by Vehicle
    No vehicle selected
    Filters Close
    Min: $0.00 Max: $101.00
    $0 $101