Search
Products
    Menu Close

    Caliber

    Caliber makes the glide and traction systems that load snowmobiles without tearing up trailer decks or ski carbides. SiraWeb carries Caliber Multi-Glides and LowPro glides, Grip Glides, Flex Glides, Trax Grabber and TraxMat traction, Edge Glides, marine bunk slides, the Poly-Shield salt shield and the E-Z Load trailer lift, with set sizes and coverage spelled out for each trailer.

    View as Grid List
    Sort by
    Display per page
    Caliber 13350 Grip Glides straight front tilt set of 22

    Caliber 13350 Grip Glides, Straight Front Tilt Set of 22

    Caliber Grip Glides 13350: the straight front tilt set of 22 pieces. Grip Glides combine a tire-grip surface for ATVs with glide grooves for snowmobile carbides. Hardware included.
    $79.99 $71.99
    Caliber 13351 Grip Glides enclosed trailer door set of 32

    Caliber 13351 Grip Glides, Enclosed Trailer Door Set of 32

    Caliber Grip Glides 13351: the enclosed trailer door set of 32 pieces. Grip Glides combine a tire-grip surface for ATVs with glide grooves for snowmobile carbides. Hardware included.
    $102.99 $92.99
    Caliber 13352 Grip Glides ramp set of 16

    Caliber 13352 Ramp Grip Glides, Set of 16

    Caliber Grip Glides 13352: the ramp set of 16 pieces. Grip Glides combine a tire-grip surface for ATVs with glide grooves for snowmobile carbides. Hardware included.
    $73.99 $66.99
    Caliber 13362 EdgeGlideTilt 4-piece set

    Caliber 13362 EdgeGlideTilt, 4-Piece Set without Hinges

    Caliber 13362 EdgeGlideTilt: a 4-piece set of edge glides without hinges that bridges the gap at a tilt trailer's edge so snowmobile skis cross without catching. Stainless hardware included.
    $41.99 $37.99
    Caliber 13401 Poly-Shield Series III salt shield

    Caliber 13401 Poly-Shield Series III Salt Shield

    Caliber Poly-Shield Series III (13401): a 25.5 inch high salt and splash shield for V-front and flat-front snowmobile trailers, fitting trailers 95 to 102 inches wide. Quick-Detach kit included.
    $453.99 $411.99
    Caliber 13511 Trailer Lift gas spring with steel ends

    Caliber 13511 Trailer Lift, Metal Ends, Gas Spring Lift Assist

    Caliber Trailer Lift 13511: a high-pressure gas spring lift assist for tilt trailers, 20 inches extended and 12 inches compressed, with steel ends. Spring, two ball-stud brackets and screws included.
    $50.99 $45.99
    Caliber Marine Slides 3 x 15 black, 10-pack

    Caliber 23010 Marine Slides, 3 x 15 Inch, Black, 10-Pack

    Caliber Marine Slides in black: low-friction bunk slides, 3 by 15 inches, 10 per pack. They mount on horizontal or vertical bunks so the boat slides on and off instead of dragging on carpet.
    $48.99 $43.99
    Caliber Marine Slides 3 x 15 white, 10-pack

    Caliber 23011 Marine Slides, 3 x 15 Inch, White, 10-Pack

    Caliber Marine Slides in white: low-friction bunk slides, 3 by 15 inches, 10 per pack. They mount on horizontal or vertical bunks so the boat slides on and off instead of dragging on carpet.
    $48.99 $43.99
    Caliber 23060 Trax Grabber 2-piece kit

    Caliber 23060 Trax Grabber, 2-Piece Kit

    Caliber 23060 Trax Grabber: a 2-piece traction kit, 16 inches wide, that grips the snowmobile track for loading traction. Fits 2.52, 2.86 and 3.0 inch track pitches. Hardware included.
    $41.99 $37.99
    Caliber 23200 Slydz-On bunk lubricant spray

    Caliber 23200 Slydz-On Bunk Lubricant, 16 Oz Spray

    Caliber Slydz-On bunk lubricant: a 16 ounce spray applied to carpeted bunks to cut friction, so the boat launches and loads with less effort. 1 pint spray bottle.
    $23.99 $20.99
    Caliber 13200 Grips 6 pack of 15 inch trailer deck traction grips for snowmobiles

    Caliber 13200 Grips

    A 6 pack of 15 inch Caliber Grips that screw flat to a snowmobile trailer deck to give the track traction and help protect the decking from stud damage. Stainless steel attaching hardware and mounting instructions are included.
    $36.99 $32.99
    Caliber 13204 Ramp Grips 6 piece kit wrapping around a snowmobile ramp crossbar

    Caliber 13204 Ramp Grips

    A 6 piece kit of Caliber Ramp Grips that wrap around 1 in ramp crossbars to protect the ramp from studded tracks and improve traction and braking control. Stainless steel Torx fasteners and driver are included.
    $36.99 $32.99
    Caliber 13210 TraxMat 18 x 54 inch

    Caliber 13210 TraxMat, 18 x 54 Inch

    Caliber TraxMat 13210: an 18 by 54 inch traction mat that protects the trailer deck and gives the snowmobile track grip. Stainless screws included.
    $60.99 $54.99
    Caliber 13211 TraxMat 18 x 72 inch

    Caliber 13211 TraxMat, 18 x 72 Inch

    Caliber TraxMat 13211: an 18 by 72 inch traction mat that protects the trailer deck and gives the snowmobile track grip. Stainless screws included.
    $78.99 $70.99
    Caliber 13305 Multi-Glides set

    Caliber 13305 Multi-Glides Single Set, 4 x 5 Ft

    Caliber Multi-Glides 13305: a single set of 4 glide sections, 5 feet each (20 ft total), 5-7/8 in. wide, with stainless fasteners included. Outfits a single-place 10 ft trailer.
    $100.99 $90.99
    Caliber 13306 Multi-Glides wide set

    Caliber 13306 Multi-Glides Wide Single Set, 4 x 5 Ft

    Caliber Multi-Glides 13306: a single set of 4 glide sections, 5 feet each (20 ft total), 8 in. wide, with stainless fasteners included. Outfits a single-place 10 ft trailer.
    $116.99 $105.99
    Caliber 13310 Multi-Glides set

    Caliber 13310 Multi-Glides Double Set, 8 x 5 Ft

    Caliber Multi-Glides 13310: a double set of 8 glide sections, 5 feet each (40 ft total), 5-7/8 in. wide, with stainless fasteners included. Outfits a 10 ft two-place trailer.
    $163.99 $148.99
    Caliber 13311 Multi-Glides wide set

    Caliber 13311 Multi-Glides Wide Double Set, 8 x 5 Ft

    Caliber Multi-Glides 13311: a double set of 8 glide sections, 5 feet each (40 ft total), 8 in. wide, with stainless fasteners included. Outfits a 10 ft two-place trailer.
    $211.99 $191.99
    Caliber 13313 Multi-Glides extension set

    Caliber 13313 Multi-Glides Extension Set, 4 x 30 Inch

    Caliber Multi-Glides extension set 13313: four 30 inch sections, 5-7/8 in. wide, that extend a Multi-Glides set to complete a 12 foot trailer. A 33-pack of stainless screws is included.
    $59.99 $53.99
    Caliber 13314 Multi-Glides extension set

    Caliber 13314 Multi-Glides Wide Extension Set, 4 x 30 Inch

    Caliber Multi-Glides extension set 13314: four 30 inch sections, 8 in. wide, that extend a Multi-Glides set to complete a 12 foot trailer. A 33-pack of stainless screws is included.
    $70.99 $63.99
    Caliber 13342 Flex-Glides low profile, set of 8

    Caliber 13342 Flex-Glides, Low Profile, Set of 8

    Caliber Flex-Glides Low Profile (13342): a set of 8 interlocking glides, 44 inches connected, for the front of V-front trailers. Stainless fasteners included.
    $50.99 $45.99
    Caliber 13343 Flex-Glides high profile, set of 8

    Caliber 13343 Flex-Glides, High Profile, Set of 8

    Caliber Flex-Glides High Profile (13343): a set of 8 interlocking glides, 44 inches connected, for the front of V-front trailers. Stainless fasteners included.
    $56.99 $50.99
    Caliber 13370 LowPro Glides Narrow 6 in extension set with four 30 in glide sections

    Caliber 13370 LowPro Glides Narrow 6 in Extension Set, 4-Piece

    The Caliber 13370 LowPro Glides Narrow extension set adds 10 ft of 6 in wide glide coverage in four 30 in sections. Stainless steel Torx mounting hardware and driver are included.
    $50.99 $45.99
    Caliber 13373 LowPro Glides Standard 9 in extension set with four 30 in glide sections

    Caliber 13373 LowPro Glides Standard 9 in Extension Set, 4-Piece

    The Caliber 13373 LowPro Glides Standard extension set adds 10 ft of 9 in wide glide coverage in four 30 in sections. Stainless steel attaching hardware and mounting instructions are included.
    $56.99 $50.99
    Caliber 13374 LowPro Glides Standard 9 in single set with eight 30 in glide sections

    Caliber 13374 LowPro Glides Standard 9 in Single Set, 8-Piece

    The Caliber 13374 LowPro Glides Standard Single Set provides 20 ft of 9 in wide glide coverage in eight 30 in sections. Hardware is included with the set.
    $102.99 $92.99
    Caliber 13375 LowPro Glides Standard 9 in double set with sixteen 30 in glide sections

    Caliber 13375 LowPro Glides Standard 9 in Double Set, 16-Piece

    The Caliber 13375 LowPro Glides Standard Double Set provides 40 ft of 9 in wide glide coverage in sixteen 30 in sections. All stainless steel screws needed to install the complete kit are included.
    $181.99 $164.99
    Caliber 13377 LowPro Glides Wide 11.5 in single set with eight 30 in glide sections

    Caliber 13377 LowPro Glides Wide 11.5 in Single Set, 8-Piece

    The Caliber 13377 LowPro Glides Wide Single Set provides 20 ft of 11.5 in wide glide coverage in eight 30 in sections. Hardware is included with the set.
    $124.99 $112.99
    Caliber 13378 LowPro Glides Wide 11.5 in double set with sixteen 30 in glide sections

    Caliber 13378 LowPro Glides Wide 11.5 in Double Set, 16-Piece

    The Caliber 13378 LowPro Glides Wide Double Set provides 40 ft of 11.5 in wide glide coverage in sixteen 30 in sections. The system is designed for snowmobiles and ATVs, with hardware included.
    $226.99 $205.99
    Caliber 13380 LowPro GripGlides Narrow 6 in single set with eight 30 in grip glide sections

    Caliber 13380 LowPro GripGlides Narrow 6 in Single Set, 8-Piece

    The Caliber 13380 LowPro GripGlides Narrow Single Set provides 20 ft of 6 in wide grip and glide coverage in eight 30 in sections. Hardware is included with the set.
    $115.99 $104.99
    Caliber 13381 LowPro GripGlides Narrow 6 in double set with sixteen 30 in grip glide sections

    Caliber 13381 LowPro GripGlides Narrow 6 in Double Set, 16-Piece

    The Caliber 13381 LowPro GripGlides Narrow Double Set provides 40 ft of 6 in wide grip and glide coverage in sixteen 30 in sections. Hardware is included with the set.
    $214.99 $194.99
    Shop by Vehicle
    No vehicle selected
    Filters Close
    Min: $4.00 Max: $1,026.00
    $4 $1026