Search
Products
    Menu Close

    Hopkins 48925 Taillight Converter: 2.1 Amp Per Stop/Turn Output Limit

    Manufacturer: Hopkins
    Hopkins 48925 taillight converter with printed wire-function identification for ground, park/tail, left turn, brake and right turn. Limited to 2.1 amps per stop/turn output.
    SKU: 648925
    Manufacturer part number: 48925
    Availability: Out of stock
    $38.99
    $23.99
    i h

    Hopkins 48925 Taillight Converter: 2.1 Amp Per Stop/Turn Output Limit

    The Hopkins 48925 is a non-powered taillight converter whose use is defined by a strict output limit: each stop/turn output is capped at 2.1 amps, and higher-load applications require a power converter instead.

    Key Features

    • Taillight converter with printed wire-function identification: White = Ground, Brown = Park/Tail, Yellow = Left Turn, Red = Brake, Green = Right Turn
    • Maximum load printed on the install sheet: do not exceed 2.1 amps per stop/turn output
    • Install location guidance printed on the sheet: rear of the vehicle or inside the trunk, away from the exhaust, shock absorbers and drivetrain

    Specifications

    BrandHopkins Towing Solutions
    Manufacturer Part Number48925
    Product TypeTaillight converter (non-powered, per the install sheet restriction)
    Maximum Load2.1 amps per stop/turn output; applications of more than 2.1 amps require a power converter
    Wire IdentificationWhite = Ground; Brown = Park/Tail; Yellow = Left Turn; Red = Brake; Green = Right Turn
    Installation Location GuidanceRear of the vehicle or inside trunk; avoid exhaust system, shock absorbers and drive train

    Compatibility

    This is a non-powered taillight converter limited to 2.1 amps per stop/turn output; applications of more than 2.1 amps require a power converter, per the Hopkins install sheet. The sheet also directs reviewing the vehicle owner's manual and the product selection guide before installing any converter, because many vehicles have sophisticated electronic systems that could be damaged if the restrictions are ignored.

    Important Purchase Notes

    Do not exceed 2.1 amps per stop/turn output. If your application draws more than that, a power converter is required instead, per the install sheet. The sheet also notes that a heavy duty flasher may be needed to eliminate rapid flashing, and directs choosing an installation location at the rear of the vehicle or inside the trunk, away from the exhaust, shock absorbers and drivetrain.

    What is the maximum load for the 48925?

    Each stop/turn output is capped at 2.1 amps. Above that level, Hopkins says to use a power converter rather than this unit.

    How are the converter wires identified?

    The sheet labels them by function: white for ground, brown for park/tail, yellow for the left turn, red for brake and green for the right turn. Wire each one to the vehicle wire carrying that same function.

    Where should the converter be installed?

    Pick a spot at the back of the vehicle, in the trunk area if that works better, and keep it clear of the exhaust, shock absorbers and drivetrain listed on the sheet. After wiring, the sheet calls for a test with the engine running.

    What should I check before installing?

    Check two references named on the sheet first, your vehicle owner's manual and the product selection guide, because a mismatch with a vehicle's electronic systems can cause damage if the converter restrictions are missed. Also be prepared that a heavy duty flasher may be needed if flashing becomes rapid.

    Hopkins Towing Solutions is the towing electrical brand of Hopkins Manufacturing Corporation, which has manufactured towing and trailering products since 1953.

    Hopkins 48925 Taillight Converter: 2.1 Amp Per Stop/Turn Output Limit

    The Hopkins 48925 is a non-powered taillight converter whose use is defined by a strict output limit: each stop/turn output is capped at 2.1 amps, and higher-load applications require a power converter instead.

    Key Features

    • Taillight converter with printed wire-function identification: White = Ground, Brown = Park/Tail, Yellow = Left Turn, Red = Brake, Green = Right Turn
    • Maximum load printed on the install sheet: do not exceed 2.1 amps per stop/turn output
    • Install location guidance printed on the sheet: rear of the vehicle or inside the trunk, away from the exhaust, shock absorbers and drivetrain

    Specifications

    BrandHopkins Towing Solutions
    Manufacturer Part Number48925
    Product TypeTaillight converter (non-powered, per the install sheet restriction)
    Maximum Load2.1 amps per stop/turn output; applications of more than 2.1 amps require a power converter
    Wire IdentificationWhite = Ground; Brown = Park/Tail; Yellow = Left Turn; Red = Brake; Green = Right Turn
    Installation Location GuidanceRear of the vehicle or inside trunk; avoid exhaust system, shock absorbers and drive train

    Compatibility

    This is a non-powered taillight converter limited to 2.1 amps per stop/turn output; applications of more than 2.1 amps require a power converter, per the Hopkins install sheet. The sheet also directs reviewing the vehicle owner's manual and the product selection guide before installing any converter, because many vehicles have sophisticated electronic systems that could be damaged if the restrictions are ignored.

    Important Purchase Notes

    Do not exceed 2.1 amps per stop/turn output. If your application draws more than that, a power converter is required instead, per the install sheet. The sheet also notes that a heavy duty flasher may be needed to eliminate rapid flashing, and directs choosing an installation location at the rear of the vehicle or inside the trunk, away from the exhaust, shock absorbers and drivetrain.

    What is the maximum load for the 48925?

    Each stop/turn output is capped at 2.1 amps. Above that level, Hopkins says to use a power converter rather than this unit.

    How are the converter wires identified?

    The sheet labels them by function: white for ground, brown for park/tail, yellow for the left turn, red for brake and green for the right turn. Wire each one to the vehicle wire carrying that same function.

    Where should the converter be installed?

    Pick a spot at the back of the vehicle, in the trunk area if that works better, and keep it clear of the exhaust, shock absorbers and drivetrain listed on the sheet. After wiring, the sheet calls for a test with the engine running.

    What should I check before installing?

    Check two references named on the sheet first, your vehicle owner's manual and the product selection guide, because a mismatch with a vehicle's electronic systems can cause damage if the converter restrictions are missed. Also be prepared that a heavy duty flasher may be needed if flashing becomes rapid.

    Hopkins Towing Solutions is the towing electrical brand of Hopkins Manufacturing Corporation, which has manufactured towing and trailering products since 1953.