Menu Close
    Back to all

    How to Unfold & Prep Your Bumper Cover for Installation

    If you’ve just received your bumper cover, you may be wondering why it’s folded.

    bumper cover Most unpainted aftermarket bumper covers come folded to assume a more compact form. Folding our bumper covers allows us to help our customers enjoy savings on shipping costs. In some cases an fully unfolded bumper cover may exceed the maximum shippable length for many carriers. Since they’re made of shape-memory plastic, they will unfold into their proper shape once they are warmed up properly.

    There are two ways to unfold your bumper cover. Depending on time constraints, available space, and weather conditions, you can either do this outdoors or inside your home.

    Here’s a step by step guide on how to unpack, unfold, and get your bumper cover ready for installation.

    Outdoor Method

    This approach makes use of the natural heat from the sun to restore the bumper cover to its original shape.

    It takes much longer but does not require any tools.

    1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).

    2. Open the packaging and remove the bumper cover.

    remove bumper cover from packaging

    remove bumper cover from packaging

    remove bumper cover from packaging

    remove bumper cover from packaging

    3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.

    4. Place the bumper cover on the cardboard surface in the position shown below.

    bumper cover on cardboard

    5. Let the bumper cover sit in the sunlight for three hours.

    bumper cover under sunlight

    6. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.

    reposition bumper cover

    7. The unfolded bumper cover is ready for further treatment.

    Indoor Method

    If direct sunlight is not available or if you have no outdoor space, you can also unfold the bumper cover indoors using a heat gun.

    This takes less time but requires more effort and care.

    1. Use the cardboard packaging as your work surface and place the bumper cover on top.

    heating bumper cover

    2. Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.

    heating bumper cover with heat gun

    3. Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.

    man heating bumper cover with heat gun

    4. Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.

    reposition bumper cover



    Take extra care when using a blade or knife to open the packaging to avoid accidentally damaging the surface of your bumper cover.

    If you see any minor scuffs, don’t worry - your bumper cover comes pre-primed for protection and should be scuffed completely before applying your chosen primer and paint.

    minor scratches on a bumper cover

    Write a comment Close