Search
Products
    Menu Close

    Suspa 10.7" 20 lbs. Gas Spring/Prop/Strut/Shock C16-14906 C1614906

    Manufacturer: Suspa
    Made in the USA, genuine Suspa gas prop part number C16-14906. No end fittings. M6 threaded ends, compatible with M6 threaded end fittings only.
    SKU: C16-14906
    Manufacturer part number: C16-14906
    $74.99
    $55.99
    i h

    This prop does not come with end fittings.  End fittings can be added to your order if needed (see related products).

    M6 threaded ends, compatible with M6 threaded end fittings only.

    Suspa® Replacement Gas Springs or sometimes called gas struts, props, springs or lift supports. This Prop is also used on Snowmobile Trailers, Cargo Trailers, Motor Homes, Boats and can be used on many other products as well.

    This is for (1) genuine Suspa® gas prop and fits many truck caps and other applications. Measurements are from center of hole to center of hole. For detailed measuring tips read our blog on measuring gas props. Please make sure you measure and check part numbers before you order. If you have a different brand of prop and can't cross reference, please contact us for assistance.

    Installation Hints:

    • Please make sure you measure and check part numbers before you order.
    • If you have a different brand of prop and can't cross reference, please contact us for assistance.
    • All measurements are from Center of Plastic Ball Socket to Center of Plastic Ball Sockets. For detailed measuring tips read our blog on measuring gas props.
    • Most props are designed to be installed barrel side up and shaft side down. We recommend they are installed the same way as they were before you removed them.
    • If a Plastic Ball Socket end fitting is included it will have an integral clip which snaps onto a diameter ball stud. If a steel end fitting is included it will need a retainer clip (sold separately) to be attached to a ball stud. If no end fitting is included, then the end fitting is sold separately.

    This prop does not come with end fittings.  End fittings can be added to your order if needed (see related products).

    M6 threaded ends, compatible with M6 threaded end fittings only.

    Suspa® Replacement Gas Springs or sometimes called gas struts, props, springs or lift supports. This Prop is also used on Snowmobile Trailers, Cargo Trailers, Motor Homes, Boats and can be used on many other products as well.

    This is for (1) genuine Suspa® gas prop and fits many truck caps and other applications. Measurements are from center of hole to center of hole. For detailed measuring tips read our blog on measuring gas props. Please make sure you measure and check part numbers before you order. If you have a different brand of prop and can't cross reference, please contact us for assistance.

    Installation Hints:

    • Please make sure you measure and check part numbers before you order.
    • If you have a different brand of prop and can't cross reference, please contact us for assistance.
    • All measurements are from Center of Plastic Ball Socket to Center of Plastic Ball Sockets. For detailed measuring tips read our blog on measuring gas props.
    • Most props are designed to be installed barrel side up and shaft side down. We recommend they are installed the same way as they were before you removed them.
    • If a Plastic Ball Socket end fitting is included it will have an integral clip which snaps onto a diameter ball stud. If a steel end fitting is included it will need a retainer clip (sold separately) to be attached to a ball stud. If no end fitting is included, then the end fitting is sold separately.
    Products specifications
    End Fittings No End Fittings
    Extended Size 10.7 inches
    Compressed Size 6.77 inches
    Pressure 30 lbs.