Search
Products
    Menu Close

    Cequent

    Cequent Towing Products makes towing and trailering gear under brands including Draw-Tite, Tow Ready, Tekonsha, Fulton, Bargman, Wesbar, and Bulldog. SiraWeb carries Cequent hitch balls and ball mounts, brake controllers and wiring harnesses, electric brake parts, trailer couplers, receiver locks, connectors, and trailer lighting. Shop the full inventory of Cequent products on SiraWeb.com. With reliable service, no hassle returns and fast shipping you can shop with confidence.

    View as Grid List
    Sort by
    Display per page
    7 Way Plastic Connector - Trailer End

    7 Way Plastic Connector - Trailer End

    12 volt thermo-plastic connector with brass contacts to prevent corrosion Built-in cable clamp prevents wear on 7-way cable All die cast metal Trailer end
    $13.49 $8.82
    Bargman round connector mounting bracket, black powder-coated steel, shown with mounting hardware

    Bargman 4/5/6 Way Round Mounting Bracket with Hardware

    Heavy-duty 16 gauge plated steel mounting bracket for 4-way, 5-way, and 6-way round connectors. Reinforced for strength, finished in black powder coat, and supplied with hardware.
    $16.49 $10.98
    Bargman 6-way car end connector, zinc-plated die-cast housing with mounting holes and round barrel

    Bargman 6-Way Car End Connector 54-60-001 (12)

    Bargman 6-way car end (vehicle side) connector with round brass split pins for good contact. Floating pins promote easy connect and disconnect, and the connector is interchangeable with all popular 6-way connectors.
    $16.49 $10.89
    Bargman flat connector mounting bracket, black powder-coated steel, shown with screws and nuts

    Bargman 7/5 Way Flat Mounting Bracket

    A heavy-duty plated steel flat mounting bracket for 4-way and 5-way flat trailer connectors. Reinforcing beads or flanges add strength, and the black finish gives it a clean look.
    $17.99 $11.74
    Bargman 7-way connector mounting bracket, black steel with circular cutout and bolt holes

    Bargman 7-Way Connector Mounting Bracket, Black, Zinc Plated 16 Gauge Steel (50-77-071)

    Bargman 7-way connector mounting bracket, made from heavy-duty zinc plated 16 gauge steel with reinforced beads and flanges for strength. Bracket only, in black.
    $3.49 $2.24
    Bargman 7-way metal connector, car end, flanged socket with spring-loaded hinged cover

    Bargman 7-Way Metal Connector, Car End

    Bargman 7-way, 12 volt metal connector for the car (vehicle) end, with a zinc-plated housing and a trigger grip for easy disconnect. Includes a mounting bracket.
    $21.49 $14.20
    Bargman 7-way metal connector, car end — flanged socket with hinged cover next to plug insert

    Bargman 7-Way Metal Connector, Car End (Vehicle Side), Bulk

    Bargman 7-way metal connector for the car end (vehicle side), supplied as the bulk variant. It is a 12 volt, zinc-plated connector with a plastic core and a trigger grip for easy disconnect.
    $20.49 $13.64
    Bargman 7-way metal connector, trailer end, with trigger grip and brass pin face

    Bargman 7-Way Metal Trailer End Connector, 12 Volt

    A 12 volt, 7-way metal connector for the trailer end of the connection. Zinc plating helps resist corrosion, and a trigger grip makes disconnecting easy.
    $14.99 $9.99
    Bargman 7-way connector, vehicle end — black socket with closed dust cover embossed 77, front three-quarter view

    Bargman 7-Way Vehicle End Connector, No Wire

    Bargman 7-way vehicle end (car end) connector, supplied without wire. It has a built-in cable clamp and includes a dust cover.
    $14.49 $9.52
    Bargman car end mounting bracket, zinc-plated steel L-shaped bracket with mounting holes

    Bargman Car-End Bracket, Zinc Plated 16 Gauge Steel, Bulk - 50-77-070

    Bargman car-end bracket made from zinc plated, heavy-duty 16 gauge steel. Reinforced beads and flanges add strength, and it is supplied in bulk packaging, sold each.
    $3.49 $2.22
    Bulldog pull pin with triangular pull ring and attached chain

    Bulldog Pull Pin Kit for Series 190 Jacks

    Pull pin kit for Bulldog series 190 jacks, supplied with a chain and cotter pin. Zinc-plated steel construction with a 7,000 lbs capacity.
    $19.99 $13.21
    Bulldog sidewind crank and gear kit — crank handle with black grip, two bevel gears, roll pins and washer

    Bulldog Sidewind Crank and Gear Kit

    Sidewind crank and gear kit for round Bulldog jacks. Rated at 2,000 lbs capacity with a 5-51/64 in. crank radius.
    $35.99 $27.99
    Bulldog stainless steel dogbone trailer lock with sleeve, black dust cap and two keys

    Bulldog Stainless Steel Trailer Dogbone Lock & Sleeve, Cequent 580405

    Universal trailer combo dogbone and coupler lock hitch pin for 1-1/4" and 2" Receivers with a dust cap by Bulldog. 1/2" diameter and a 5/8" diameter with sleeve on, stainless steel finish. Flush-style hitch lock with sleeve secures your ball mount, bike rack, cargo carrier or other accessory to a 2" or 1-1/4" trailer hitch receiver. Rustproof stainless steel construction. Limited Lifetime Warranty.
    $46.49 $30.99
    Cequent 40-amp circuit breaker with metal mounting bracket and two stud terminals

    CEQUENT TOWING 40 Amp Circuit Breaker

    A 40 amp circuit breaker for 6, 12, and 24 volt DC systems that need over-current protection. Its non-corrosive molded cover eliminates grounding when operating against a fault line, and a mounting bracket is included.
    $18.49 $12.15
    Cequent 50-amp circuit breaker with metal mounting bracket and two stud terminals

    CEQUENT TOWING 50 Amp Circuit Breaker 7022A-S

    A 50 amp circuit breaker from CEQUENT TOWING for over-current protection in 6, 12, and 24 volt DC applications. Its non-corrosive molded cover eliminates grounding when operating against a fault line.
    $16.49 $10.94
    Zinc-plated C-shaped left-hand brake actuating lever with mounting holes and raised tab

    Cequent Towing 5206 Actuating Lever, Left-Hand (L.H.), for Hayes Brakes

    Left-hand (L.H.) actuating lever for Hayes brakes from Cequent Towing.
    $22.99 $15.32
    Dexter left-hand brake actuating lever, zinc-plated curved lever with mounting holes and roller pin

    Cequent Towing 5232 Actuating Lever, Left-Hand (L.H.), for Dexter Brakes

    The Cequent Towing 5232 is a left-hand (L.H.) actuating lever designed for Dexter brakes.
    $22.99 $15.32
    Brake return spring set — four coil springs with hooked ends arranged diagonally

    Cequent Towing 5305 Return Spring Set (Axle Set)

    Cequent Towing return spring set supplied as an axle set. Designed for select Dexter and Hayes brakes.
    $15.99 $10.76
    Brake return springs for electric trailer brakes — pair of long coil springs with hooked extension rods

    Cequent Towing 5306 Return Spring Set for Electric Trailer Brakes (Axle Set)

    Cequent Towing return spring set for electric trailer brakes. Supplied as an axle set and sold each.
    $8.30 $7.47
    Trailer hub grease seal, single lip — metal ring with dark inner lip, angled view

    Cequent Towing 5607 Grease Seal, 1.750 in. ID x 2.330 in. OD, Single Lip

    The Cequent Towing 5607 is a single-lip grease seal. It is sold individually.
    $9.99 $7.49
    Electric brake magnet kit — oval magnet with two wires, coil spring and clip

    Cequent Towing 6106 Magnet Kit for AL-KO 10 in. x 2-1/4 in. Trailer Brakes

    Magnet kit for AL-KO 10 in. x 2-1/4 in. trailer brakes, with light green wires. Fits and replaces AL-KO Kober 10 x 2-1/4 in. units.
    $63.79 $56.99
    Electric brake magnet kit — oval magnet with wires, coil spring and clip

    Cequent Towing 6109 Magnet Kit for AL-KO 12 in. x 2 in. Trailer Brakes

    Magnet kit for AL-KO 12 in. x 2 in. trailer brakes with white wires. Fits and replaces AL-KO Kober 12 x 2 brakes in the 6K and 7K classes.
    $66.16 $58.99
    AL-KO left-hand brake actuating lever, zinc-plated curved lever with mounting holes and raised tab

    Cequent Towing 6206 Actuating Lever, Left-Hand (L.H.), for AL-KO 10 in. Brakes

    Left-hand (L.H.) actuating lever from Cequent Towing for AL-KO 10 in. brakes.
    $20.41 $18.37
    Receiver tube cover kit with gold Chevrolet bowtie emblem — emblem plate, two inserts, mounting screws and cap laid out flat

    Cequent Towing 6431 Receiver Tube Cover, 2 in. Square Receiver, Black with Chevrolet Bowtie Logo

    Black plastic receiver tube cover with a Chevrolet bowtie logo, made for a 2 in. square receiver. It keeps debris out of the hitch opening when you are not towing.
    $65.65 $57.09
    Receiver tube cover kit with red Dodge Ram logo emblem — emblem plate, two inserts, mounting screws and cap laid out flat

    Cequent Towing 6432 Receiver Tube Cover – 2 in. Square Receiver, Black Plastic with Dodge Ram Logo

    Black plastic receiver tube cover with a Dodge Ram logo, made for 2 in. square receivers. It helps keep debris out of the hitch opening when you are not towing.
    $65.65 $57.09
    Battery post adapters, pair — brass threaded studs with hex nuts and yellow ring terminals

    CEQUENT TOWING Battery Post Adapter, Pair

    Side post adapters for General Motors vehicles from CEQUENT TOWING. Sold as a pair.
    $19.43 $18.49
    Winch mounting plate handle kit — black U-shaped tubular handle with grips and mounting bolts

    Cequent Towing Handle Kit for Winch Mounting Plate, Part #6980

    Handle kit for a winch mounting plate from Cequent Towing. Includes a black U-shaped tubular handle with mounting plates and bolts.
    $207.48 $129.99
    Brake hardware kit for Dexter 7 x 1-1/4 brake assembly — springs, hold-down clips and adjusting screw parts laid out flat

    Cequent Towing Hardware Kit for Dexter 7 in. x 1-1/4 in. Brake Assembly 5320

    Hardware kit from Cequent Towing for the Dexter 7 in. x 1-1/4 in. brake assembly. It combines the return spring, hold down clips, and adjusting screw components in one kit.
    $40.49 $34.19
    Cequent receiver tube cover for 2-inch square receiver, black plastic, three-quarter view with mounting clip

    Cequent Towing Receiver Tube Cover, 2 Inch Square, Black Plastic

    Black plastic receiver tube cover in a 2 in. square size. Use it when you are not towing to help keep debris out of the hitch opening.
    $7.99 $5.38
    Draw-Tite chrome hitch ball, 1-7/8 inch, with threaded shank, washer and hex nut

    Draw-Tite 1-7/8 in. Chrome Trailer Hitch Ball, 2,000 lb GTW (63880)

    This Draw-Tite trailer hitch ball has a 1-7/8 in. ball diameter and a chrome finish. It is rated for up to 2,000 lb gross trailer weight and includes built-in wrench flats.
    $25.49 $16.90
    Shop by Vehicle
    No vehicle selected
    Filters Close
    Min: $2.00 Max: $139.00
    $2 $139