Erickson 59169 Weld-On Forged Flip Anchor D-Ring, 3/4 in, 20,000 lb Break Strength, 6500 lb WLL
Weld this forged steel Erickson D-ring to a flat steel surface on your truck or trailer and you have a 20,000 lb break strength anchor point for heavy equipment.
Key Features
- Forged steel D-ring, weld-on mounting plate
- 20,000 lb break strength, 6500 lb working load limit
- 3/4 in thick ring, 3 in inside diameter
- Ring rotates 180 degrees
- Raw finish
Specifications
| Brand | Erickson |
|---|
| Manufacturer Part Number | 59169 |
|---|
| Product Type | Weld-On Forged Flip Anchor (D-Ring) |
|---|
| Material | Forged steel |
|---|
| Break Strength | 20,000 lb |
|---|
| Working Load Limit | 6500 lb |
|---|
| Ring Thickness | 0.75 in (3/4 in) |
|---|
| Ring Inside Diameter | 3 in |
|---|
| Ring Outside Size | 4.6 in wide x 4.5 in high |
|---|
| Mounting Plate | 0.5 in thick, 2.6 in wide, 1 in opening |
|---|
| Finish | Raw finish |
|---|
| Sold As | 1 anchor |
|---|
Compatibility
Welds to flat steel surfaces on trucks and trailers. The manufacturer names tractors, cars and other heavy duty uses for this anchor.
Important Purchase Notes
Sold as one weld-on anchor with its integral mounting plate. Welding is required for installation; there are no bolt holes.
Frequently Asked Questions
Is 20,000 lb the working load?
No. 20,000 lb is the break strength. The working load limit is 6500 lb.
How does it install?
It welds to a flat steel surface. The D-ring itself rotates 180 degrees on its plate.
What is the ring size?
The ring is 3/4 in thick with a 3 in inside diameter.
Erickson Manufacturing has made cargo control and load securement products since 1977. Shop Erickson at SiraWeb, where every part is listed by its manufacturer part number with the ratings and specifications you need to order with confidence.