Search
Products
    Menu Close

    Hopkins 43805 Plug-In Simple Wiring Kit with Power Converter: Hyundai Santa Fe 2001-06

    Manufacturer: Hopkins
    Hopkins 43805 Plug-In Simple wiring kit for the Hyundai Santa Fe 2001-06. Plugs into the vehicle's taillight wiring, with no cutting or splicing, and provides a 4-wire flat trailer connector.
    SKU: 643805
    Manufacturer part number: 43805
    Availability: In stock
    $71.49
    $34.99
    i h

    Hopkins 43805 Plug-In Simple Wiring Kit with Power Converter: Hyundai Santa Fe 2001-06

    The Hopkins 43805 is a Plug-In Simple wiring kit that adds a 4-wire flat trailer connector to the Hyundai Santa Fe 2001-06. It plugs directly into the vehicle's existing taillight wiring connectors, so the factory wiring stays intact.

    Key Features

    • Plug-In Simple design: no cutting, splicing or soldering required
    • Provides a standard 4-wire flat trailer connector
    • Connectors match the tow vehicle's for a weather-tight fit
    • Built-in short-proof 12-volt power converter protects the vehicle's electrical system from trailer-light loads
    • Converter maximum load: 2.1 amps on left and right turn (one bulb on each side)

    Specifications

    BrandHopkins Towing Solutions
    Manufacturer Part Number43805
    Product TypePlug-In Simple wiring kit with 12-volt power converter
    Trailer Connector4-wire flat
    Converter Type12-volt power converter, short-proof
    Converter Maximum Load2.1 amps on left and right turn (one bulb on each side)
    Vehicle ApplicationsHyundai Santa Fe 2001-06
    Estimated Installation Time1.5 hours (Hopkins application chart)

    Compatibility

    Hopkins' application chart lists the 43805 for:

    • Hyundai Santa Fe, 2001-06

    Installation note: Hopkins' install sheet for this kit locates the harnesses approximately 8 in. behind both taillight assemblies, accessed through the rear door, rear floor molding and rear side panels; the green-wire connector goes to the passenger side and the yellow wire to the driver side.

    Important Purchase Notes

    Mounting accessories, dust covers and grease packets are included, per the Hopkins Plug-In Simple wiring-kit family description.

    Recommended Related Parts

    If your trailer's wiring lead is short, pair this kit with a 4-wire flat extension such as the Hopkins 48235 10 ft 4 Wire Flat Extension. A 4-flat circuit tester lets you verify each light function at the connector before you tow.

    Why Buy This Part

    The Santa Fe's electrical system was not designed to carry trailer-light loads directly. This kit's built-in power converter draws the trailer-light power safely and protects the vehicle's wiring, and its short-proof design guards against damage from a short in the trailer wiring. It is protection a plain connector kit cannot offer this vehicle.

    Which vehicles does the 43805 wiring kit fit?

    Hopkins lists this kit for: Hyundai Santa Fe (2001-06). Confirm your vehicle's year and equipment against that list before ordering.

    Do I have to cut or splice my vehicle's wiring?

    No cutting or splicing is needed. The kit plugs into the connectors already on the vehicle's taillight wiring, and the matched connectors seal weather-tight.

    Why does this kit include a power converter?

    This vehicle's wiring is not built to power trailer lights directly, so the kit's built-in converter powers them instead and protects the vehicle's circuits. It is short-proof, with a maximum load of 2.1 amps on each turn-signal side (one bulb per side).

    What is included with the kit?

    The wiring kit itself, plus mounting accessories, dust covers and grease packets, per Hopkins' description of its Plug-In Simple wiring kits.

    Hopkins Towing Solutions is the towing electrical brand of Hopkins Manufacturing Corporation, which has manufactured towing and trailering products since 1953.

    Hopkins 43805 Plug-In Simple Wiring Kit with Power Converter: Hyundai Santa Fe 2001-06

    The Hopkins 43805 is a Plug-In Simple wiring kit that adds a 4-wire flat trailer connector to the Hyundai Santa Fe 2001-06. It plugs directly into the vehicle's existing taillight wiring connectors, so the factory wiring stays intact.

    Key Features

    • Plug-In Simple design: no cutting, splicing or soldering required
    • Provides a standard 4-wire flat trailer connector
    • Connectors match the tow vehicle's for a weather-tight fit
    • Built-in short-proof 12-volt power converter protects the vehicle's electrical system from trailer-light loads
    • Converter maximum load: 2.1 amps on left and right turn (one bulb on each side)

    Specifications

    BrandHopkins Towing Solutions
    Manufacturer Part Number43805
    Product TypePlug-In Simple wiring kit with 12-volt power converter
    Trailer Connector4-wire flat
    Converter Type12-volt power converter, short-proof
    Converter Maximum Load2.1 amps on left and right turn (one bulb on each side)
    Vehicle ApplicationsHyundai Santa Fe 2001-06
    Estimated Installation Time1.5 hours (Hopkins application chart)

    Compatibility

    Hopkins' application chart lists the 43805 for:

    • Hyundai Santa Fe, 2001-06

    Installation note: Hopkins' install sheet for this kit locates the harnesses approximately 8 in. behind both taillight assemblies, accessed through the rear door, rear floor molding and rear side panels; the green-wire connector goes to the passenger side and the yellow wire to the driver side.

    Important Purchase Notes

    Mounting accessories, dust covers and grease packets are included, per the Hopkins Plug-In Simple wiring-kit family description.

    Recommended Related Parts

    If your trailer's wiring lead is short, pair this kit with a 4-wire flat extension such as the Hopkins 48235 10 ft 4 Wire Flat Extension. A 4-flat circuit tester lets you verify each light function at the connector before you tow.

    Why Buy This Part

    The Santa Fe's electrical system was not designed to carry trailer-light loads directly. This kit's built-in power converter draws the trailer-light power safely and protects the vehicle's wiring, and its short-proof design guards against damage from a short in the trailer wiring. It is protection a plain connector kit cannot offer this vehicle.

    Which vehicles does the 43805 wiring kit fit?

    Hopkins lists this kit for: Hyundai Santa Fe (2001-06). Confirm your vehicle's year and equipment against that list before ordering.

    Do I have to cut or splice my vehicle's wiring?

    No cutting or splicing is needed. The kit plugs into the connectors already on the vehicle's taillight wiring, and the matched connectors seal weather-tight.

    Why does this kit include a power converter?

    This vehicle's wiring is not built to power trailer lights directly, so the kit's built-in converter powers them instead and protects the vehicle's circuits. It is short-proof, with a maximum load of 2.1 amps on each turn-signal side (one bulb per side).

    What is included with the kit?

    The wiring kit itself, plus mounting accessories, dust covers and grease packets, per Hopkins' description of its Plug-In Simple wiring kits.

    Hopkins Towing Solutions is the towing electrical brand of Hopkins Manufacturing Corporation, which has manufactured towing and trailering products since 1953.