Search
Products
    Menu Close

    Hopkins 48025 4 Flat Connector, Vehicle Side (Car End), 48 in

    Manufacturer: Hopkins
    Hopkins 48025 4 Flat connector for the vehicle side (car end), 48 inches long. It includes 3 splices, and its car side wires are matched by function to the tow vehicle.
    SKU: 648025
    Manufacturer part number: 48025
    GTIN: 079976480253
    Availability: In stock
    $11.99
    $4.99
    i h

    Hopkins 48025 4 Flat Connector, Vehicle Side (Car End), 48 in

    The Hopkins 48025 is a vehicle side (car end) 4 Flat connector with a 48 inch lead. It gives the tow vehicle the 4 Flat connection that the trailer's 4 Flat plugs into.

    Key Features

    • Vehicle side (car end) 4 Flat connector, female half
    • Length: 48 inches
    • 3 splices included
    • Wires matched by function to the tow vehicle, per the Hopkins install sheet

    Specifications

    BrandHopkins Towing Solutions
    Manufacturer Part Number48025
    Product Type4 Flat connector, vehicle side (car end)
    Length48 inches
    Included3 splices
    Wiring Identification (install sheet)White: ground; Yellow: left turn; Green: right turn; Brown: taillight

    Compatibility

    This is a vehicle side 4 Flat connector: its female half is the car side, and it mates with the trailer's 4 Flat.

    Installation note: per its Hopkins install sheet, choose an installation location at the rear of the vehicle or inside the trunk, attach the car side colour wires to the same functions on the tow vehicle, then plug into the trailer and check the lighting system.

    Important Purchase Notes

    Three splices are included, per the Hopkins guide entry for this part number.

    Common Applications

    Hopkins' guide describes 4 Flat connectors generally as found on small boat, utility, jet ski, snowmobile and small camper trailers, where right turn/brake, left turn/brake, tail/marker lights and a ground are needed.

    Recommended Related Parts

    If your trailer's wiring lead is short, pair this connector with a 4 Flat extension such as the Hopkins 48235 10 ft 4 Flat Extension to bridge the gap between the vehicle's 4 Flat and the trailer.

    Is this the vehicle side or the trailer side connector?

    The vehicle side (car end), not the trailer side. This is the half that stays with the tow vehicle and receives the trailer's plug.

    How long is the 48025?

    48 inches, per the Hopkins guide entry for this part number.

    What is included with it?

    Three splices are included, per the Hopkins guide. The guide entry for this part number does not list a dust cover, terminal grease or a ground screw.

    How do I wire it?

    Match each wire to the same lighting function on the vehicle: white for ground, yellow for left turn, green for right turn and brown for taillight. Once wired, plug into the trailer and test the lights, as the install sheet directs.

    Hopkins Towing Solutions is the towing electrical brand of Hopkins Manufacturing Corporation, which has manufactured towing and trailering products since 1953.

    Hopkins 48025 4 Flat Connector, Vehicle Side (Car End), 48 in

    The Hopkins 48025 is a vehicle side (car end) 4 Flat connector with a 48 inch lead. It gives the tow vehicle the 4 Flat connection that the trailer's 4 Flat plugs into.

    Key Features

    • Vehicle side (car end) 4 Flat connector, female half
    • Length: 48 inches
    • 3 splices included
    • Wires matched by function to the tow vehicle, per the Hopkins install sheet

    Specifications

    BrandHopkins Towing Solutions
    Manufacturer Part Number48025
    Product Type4 Flat connector, vehicle side (car end)
    Length48 inches
    Included3 splices
    Wiring Identification (install sheet)White: ground; Yellow: left turn; Green: right turn; Brown: taillight

    Compatibility

    This is a vehicle side 4 Flat connector: its female half is the car side, and it mates with the trailer's 4 Flat.

    Installation note: per its Hopkins install sheet, choose an installation location at the rear of the vehicle or inside the trunk, attach the car side colour wires to the same functions on the tow vehicle, then plug into the trailer and check the lighting system.

    Important Purchase Notes

    Three splices are included, per the Hopkins guide entry for this part number.

    Common Applications

    Hopkins' guide describes 4 Flat connectors generally as found on small boat, utility, jet ski, snowmobile and small camper trailers, where right turn/brake, left turn/brake, tail/marker lights and a ground are needed.

    Recommended Related Parts

    If your trailer's wiring lead is short, pair this connector with a 4 Flat extension such as the Hopkins 48235 10 ft 4 Flat Extension to bridge the gap between the vehicle's 4 Flat and the trailer.

    Is this the vehicle side or the trailer side connector?

    The vehicle side (car end), not the trailer side. This is the half that stays with the tow vehicle and receives the trailer's plug.

    How long is the 48025?

    48 inches, per the Hopkins guide entry for this part number.

    What is included with it?

    Three splices are included, per the Hopkins guide. The guide entry for this part number does not list a dust cover, terminal grease or a ground screw.

    How do I wire it?

    Match each wire to the same lighting function on the vehicle: white for ground, yellow for left turn, green for right turn and brown for taillight. Once wired, plug into the trailer and test the lights, as the install sheet directs.

    Hopkins Towing Solutions is the towing electrical brand of Hopkins Manufacturing Corporation, which has manufactured towing and trailering products since 1953.